Cleaning tips and instructions - Hatop
Professional cleaning tips for HATOCH® products
Get the most out of your HATOCH® cleaning solutions. Here you will find proven instructions for optimal results – developed from 25 years of practical experience in professional building cleaning.
🎯 Properly removing deep primer
Preparation is everything
- Check the surface: Always test HATOCH® Deep Primer Remover on an inconspicuous area first.
- Prepare the room: Ventilate well, cover sensitive objects
- Prepare the following tools: sponge, microfiber cloth, and possibly a soft brush.
Step-by-step instructions
- Application: Apply HATOCH® Deep Primer Remover undiluted to the affected area.
- Allow to work: Depending on the type of primer, leave on for 5-15 minutes (do not let dry!).
- Treat mechanically: Use a sponge or soft brush and work in circular motions.
- Wipe clean: Wipe thoroughly with clean water and a microfiber cloth.
- Allow to dry: Let the surface dry completely and check the result.
💡 Professional tips for stubborn cases
- Multiple treatments: Repeat the process for thick layers of deep primer.
- Pay attention to the temperature: Optimal room temperature: 15-25°C
- Don't apply too much pressure: Let the product do the work – aggressive rubbing is not necessary.
- Silicate deep primer: May require a longer exposure time (up to 20 minutes).
🪵 Remove varnish residue
Application of HATOCH® varnish remover
- Apply generously: Apply varnish remover evenly to the surface.
- Note the application time: 10-20 minutes depending on the thickness of the glaze.
- Check for loosening: The varnish should peel off easily.
- Finishing step: Remove the loosened varnish with a sponge or cloth.
- Post-treatment: Wipe with clean water
⚠️ Important for wooden surfaces
- Always test in an inconspicuous area first.
- Do not leave on for too long (max. 20 min.)
- Proceed with extra care when working on painted surfaces.
🧴 Professionally remove adhesive residue
How to use HATOCH® adhesive residue remover correctly
- Identify the type of adhesive: Different adhesives require different application times.
- Apply product: Apply directly to the adhesive residue.
- Leave to set for 3-10 minutes (depending on the adhesive)
- Removal: Carefully remove with a spatula or cloth.
- Cleaning: Remove residues with water
Suitable for:
- Label residue
- adhesive tape remnants
- Mounting adhesive (not cured)
- Double-sided adhesive tape
🧽 General cleaning tips for best results
dosage
- Use undiluted: HATOCH® products are ready to use – no dilution required.
- Use sparingly: Less is often more – it's better to treat twice than to overdose.
Security
- Gloves recommended: Even though HATOCH® is gentle on the skin, gloves protect against contamination.
- Ventilate well: Ensure a pleasant working environment
- No training required: Thanks to ingredients that don't require declaration.
storage
- Store in a cool, dry place (5-25°C)
- Protect from direct sunlight
- No special storage required
❓ Avoid common mistakes
- ❌ Insufficient contact time: Give the product time to work.
- ❌ Allow to dry: The product should remain moist during the application time.
- ❌ Wrong tools: Do not use steel wool or hard brushes on delicate surfaces
- ❌ Do not wipe afterwards: Always rinse with clean water.
📞 Need individual advice?
Do you have a particularly stubborn stain or are you unsure about how to use it? Our team will be happy to help you:
Email: info@hatoch.de
Phone: Contact details can be found on our contact page.
With over 28 years of experience in professional building cleaning, we find the right solution for every problem.